Loading
Charge is never created or destroyed—only transferred between objects through conduction, induction, or friction.
The investigation of electric charge spans more than two millennia, beginning with the ancient Greek observation that rubbed amber attracts lightweight objects such as feathers and straw. Despite this early awareness, it was not until the Enlightenment that natural philosophers began to systematically categorize electrical phenomena and articulate the principles governing them. The recognition that charge is a conserved quantity—never created or destroyed in any physical process—ranks among the most fundamental insights in all of physics, ultimately underpinning Maxwell's equations and modern quantum electrodynamics alike.
Franklin's crucial insight—that rubbing a glass rod with silk does not create charge but instead redistributes it between the rod and the silk—set the stage for all subsequent electrostatic theory. This section of the course addresses the question: How is charge distributed among objects, and what mechanisms govern that redistribution? Answering this question requires a firm grasp of the conservation law and the three primary charging processes: friction (triboelectric charging), conduction, and induction.
Electric charge is one of the intrinsic properties of matter, analogous in some respects to mass but differing in that it exists in two varieties—positive and negative—and obeys an exact conservation law. In a closed system the algebraic sum of all charges remains constant regardless of internal interactions. At the atomic level, protons carry a fixed positive charge +e and electrons carry −e, while neutrons are electrically neutral. Ordinary matter is overwhelmingly neutral because atoms contain equal numbers of protons and electrons; charging an object macroscopically involves transferring a negligible fraction of the total electron population.
In the diagram above, each column depicts one of the three principal charging mechanisms. The leftmost column shows triboelectric (friction) charging: electrons migrate from the glass to the silk because silk has a higher electron affinity, leaving the glass positively charged and the silk negatively charged by the same magnitude. The center column illustrates charging by conduction, where direct physical contact allows charge to flow from the charged object to the neutral one until the electrostatic potential equalizes across both conductors. In this process both objects end up carrying the same sign of charge. The rightmost column depicts charging by induction—the most subtle method—where no contact occurs between the charged object and the conductor. Instead, the external field polarizes the conductor; grounding then drains the repelled charge to earth. When the ground and the inducing charge are removed (in that order), the conductor is left with a net charge opposite to the inducing charge. The bottom row confirms that in every mechanism the total charge of the interacting system remains zero, verifying conservation.
The conservation of charge is expressed both in integral (global) and differential (local) forms. In AP Physics C the integral statement suffices for most problems, but exposure to the continuity equation prepares you for the deeper connection between conservation laws and symmetry (Noether's theorem applied to gauge invariance in electrodynamics).
The conduction equation is among the most commonly tested quantitative results on the AP exam. Note carefully that the charges are algebraic: if one sphere carries +5 μC and the other −3 μC, then after contact each carries (+5 − 3)/2 = +1 μC. The total system charge of +2 μC is conserved throughout.
Each charging process has distinct physical prerequisites, produces a characteristic sign relationship between the resulting charges, and is governed by subtly different physics. Understanding these distinctions is essential for both the multiple-choice and free-response sections of the AP exam, where test-writers frequently exploit common student confusions—such as the belief that induction requires contact or that conduction can produce opposite-sign charging.
A few additional subtleties merit attention. In charging by friction, the direction of electron transfer depends on the relative positions of the two materials on the triboelectric series, an empirically determined ranking of materials by their tendency to lose or gain electrons. Materials higher on the series (e.g., glass, human hair) tend to donate electrons to materials lower on the series (e.g., rubber, teflon). In charging by conduction, the equilibrium condition is that both conductors reach the same electrostatic potential; for identical conducting spheres this means equal charge sharing, but for spheres of different radii the charge distributes in proportion to their radii (and hence capacitances). In charging by induction, the order of operations is paramount: the ground must be disconnected before the inducing charge is removed, otherwise the polarized charges simply recombine and the conductor returns to neutrality.
Consider two identical isolated conducting spheres, A and B. Sphere A initially carries a charge of +6.0 μC and sphere B carries −2.0 μC. They are brought into contact, allowed to reach equilibrium, and then separated. The spheres are then used in a Coulomb-force measurement at a center-to-center distance of 0.30 m. Determine (a) the final charge on each sphere after separation, and (b) the magnitude of the electrostatic force between them.
| Aspect | Correct Understanding | Common Misconception |
|---|---|---|
| What is transferred? | Only electrons move in typical macroscopic charging; protons are fixed in nuclei. | "Protons move to charge an object positively." |
| Charging by induction | No contact between source and target; grounding is essential to produce a net charge. | "The charged rod touches the conductor during induction." |
| Conduction sign | Both objects end up with the same sign of charge after conduction. | "Conduction always gives opposite-sign charges." |
| Charge creation | Charge is redistributed, not created. Even in pair production (e⁺e⁻), net charge remains zero. | "Rubbing creates charge out of nothing." |
| Grounding order in induction | Remove ground first, then remove inducing charge. Reversing order cancels the effect. | "It doesn't matter which you remove first." |
The ideas of charge conservation and redistribution extend naturally to several advanced topics you will encounter both later in AP Physics C and in university-level electrodynamics. Gauss's law, for instance, relies implicitly on conservation: the net flux through a closed surface equals the enclosed charge divided by ε₀, and that enclosed charge is a well-defined, conserved quantity. Capacitor circuits redistribute charge between plates and through wires in a manner that strictly obeys conservation—indeed, Kirchhoff's junction rule (ΣI = 0) is simply the continuity equation applied at a node.
| This Lesson's Concept | Advanced Extension |
|---|---|
| Σq = const (closed system) | Continuity equation ∂ρ/∂t + ∇ · J = 0 (local charge conservation in Maxwell's equations) |
| Charge sharing between spheres | Capacitance-based charge redistribution: q ∝ C, with V_final = Q_total / (C₁ + C₂) |
| Induction (polarization of conductors) | Electrostatic shielding, Faraday cages, and the method of image charges |
| Triboelectric charging | Contact potential difference (work function), thermionic emission, photoelectric effect |
| q = ne (quantization) | Millikan experiment analysis; fractional charges in quarks (confined, not free) |
As you progress through the AP course, you will see conservation of charge appear repeatedly in circuit analysis (Kirchhoff's rules), in the charging and discharging of capacitors (RC circuits), and in the displacement current term that Maxwell added to Ampère's law. The universality of this conservation law is one of the deep reasons why electromagnetism is so internally consistent and mathematically elegant.
This lesson established that electric charge is a conserved, quantized property of matter, existing in integer multiples of the elementary charge e ≈ 1.602 × 10⁻¹⁹ C. The conservation of charge states that the algebraic sum of all charges in an isolated system remains constant regardless of internal processes. This principle is expressed globally as Σq_before = Σq_after and locally as the continuity equation ∂ρ/∂t + ∇ · J = 0. Three primary mechanisms transfer charge between objects: friction (triboelectric charging) transfers electrons between two different materials rubbed together; conduction redistributes charge through direct contact until potentials equalize (yielding same-sign charge on both objects); and induction uses an external field to polarize a conductor, with grounding selectively removing one sign of charge to leave a net charge opposite to the inducing charge—all without any contact between source and target.
Key results to remember: for identical conducting spheres in contact, charge divides equally (q' = Q_total/2); for unequal spheres, charge distributes in proportion to capacitance (and hence radius). Induction requires removing the ground before removing the inducing charge; reversing this order nullifies the effect. Conservation of charge underpins Kirchhoff's junction rule, Gauss's law, and ultimately the full structure of Maxwell's equations—making it one of the most far-reaching principles in all of physics.
Keep learning with more lessons from the same subject.