Circular Motion - AP Physics C: Electricity and Magnetism

Card 1 of 55

Didn't Know

Knew It

1 of 2019 left

Question

A ball of mass is tied to a rope and moves along a horizontal circular path of radius as shown in the diagram (view from above). The maximum tension the rope can stand before breaking is given by . Which of the following represents the ball's linear velocity given that the rope does not break?

Tap to reveal answer

Answer

This is a centripetal force problem. In this case the tension on the rope is the centripetal force that keeps the ball moving on a circle.

$T=F_$C=\frac{mv^2$}{r}$$

If we want for the rope not to break, then the tension should never exceed .

$T_${max}\geq$\frac{mv^2$}{r}$$

Now we just solve for velocity:

← Didn't Know|Knew It →

Question

A ball of mass is tied to a rope and moves along a horizontal circular path of radius as shown in the diagram (view from above). The maximum tension the rope can stand before breaking is given by . Which of the following represents the ball's linear velocity given that the rope does not break?

Tap to reveal answer

Answer

This is a centripetal force problem. In this case the tension on the rope is the centripetal force that keeps the ball moving on a circle.

$T=F_$C=\frac{mv^2$}{r}$$

If we want for the rope not to break, then the tension should never exceed .

$T_${max}\geq$\frac{mv^2$}{r}$$

Now we just solve for velocity:

← Didn't Know|Knew It →

Question

A 1.6kg ball is attached to a 1.8m string and is swinging in circular motion horizontally at the string's full length. If the string can withstand a tension force of 87N, what is the maximum speed the ball can travel without the string breaking?

Tap to reveal answer

Answer

The ball is experiencing centripetal force so that it can travel in a circular path. This centripetal force is written as the equation below.

$F_$c=ma=\frac{mv^2$}{r}$$

Remember that centripetal acceleration is given by the following equation.

Since the centripetal force is coming from the tension of the string, set the tension force equal to the centripetal force.

Since we're trying to find the speed of the ball, we solve for v.

$v=$\sqrt{\frac{Tr}{m}$}$

We know the following information from the question.

We can use this information in our equation to solve for the speed of the ball.

$v=$\sqrt{\frac{(87N)(1.8m)}{1.6kg}$}}$

$v=9.9$\frac{m}{s}$$

← Didn't Know|Knew It →

Question

In uniform circular motion, the net force is always directed .

Tap to reveal answer

Answer

The correct answer is "toward the center of the circle." Newton's second law tells us that the direction of the net force will be the same as the direction of the acceleration of the object.

In uniform circular motion, the object accelerates towards the center of the circle (centripetal acceleration); the net force acts in the same direction.

← Didn't Know|Knew It →

Question

A car moves around a circular path of radius 100m at a velocity of $20$\frac{m}{s}$$ . What is the coefficient of friction between the car and the road?

Tap to reveal answer

Answer

The force of friction is what keeps the car in circular motion, preventing it from flying off the track. In other words, the frictional force will be equal to the centripetal force.

$F_$c=m$\frac{v^2$}{r}$$

$F_f=\mu F_N=\mu mg$

$F_c=F_c\rightarrow $m$\frac{v^2$}{r}$=mg\mu$

We can cancel mass from either side of the equation and rearrange to solve for the coefficient of friction:

We can use our given values to solve:

← Didn't Know|Knew It →

Question

An object of mass 10kg undergoes uniform circular motion with a constant velocity of $10$\frac{m}{s}$$ at a radius of 10m. How long does it take for the object to make one full revolution?

Tap to reveal answer

Answer

The time for one full revolution can be calculated simply by manipulating the defintion of velocity, where the distance is just the circumference of the circlular path. The time it takes is modeled by the following equation:

$t=\frac{d}{v}$=\frac{2\pi r}{v}$$

Use the given radius and velocity to solve for the time per revolution:

$t=\frac{2\pi(10m)}{10\frac{m}${s}}=2\pi\approx6.3s$

← Didn't Know|Knew It →

Question

A 1.6kg ball is attached to a 1.8m string and is swinging in circular motion horizontally at the string's full length. If the string can withstand a tension force of 87N, what is the maximum speed the ball can travel without the string breaking?

Tap to reveal answer

Answer

The ball is experiencing centripetal force so that it can travel in a circular path. This centripetal force is written as the equation below.

$F_$c=ma=\frac{mv^2$}{r}$$

Remember that centripetal acceleration is given by the following equation.

Since the centripetal force is coming from the tension of the string, set the tension force equal to the centripetal force.

Since we're trying to find the speed of the ball, we solve for v.

$v=$\sqrt{\frac{Tr}{m}$}$

We know the following information from the question.

We can use this information in our equation to solve for the speed of the ball.

$v=$\sqrt{\frac{(87N)(1.8m)}{1.6kg}$}}$

$v=9.9$\frac{m}{s}$$

← Didn't Know|Knew It →

Question

In uniform circular motion, the net force is always directed .

Tap to reveal answer

Answer

The correct answer is "toward the center of the circle." Newton's second law tells us that the direction of the net force will be the same as the direction of the acceleration of the object.

In uniform circular motion, the object accelerates towards the center of the circle (centripetal acceleration); the net force acts in the same direction.

← Didn't Know|Knew It →

Question

A car moves around a circular path of radius 100m at a velocity of $20$\frac{m}{s}$$ . What is the coefficient of friction between the car and the road?

Tap to reveal answer

Answer

The force of friction is what keeps the car in circular motion, preventing it from flying off the track. In other words, the frictional force will be equal to the centripetal force.

$F_$c=m$\frac{v^2$}{r}$$

$F_f=\mu F_N=\mu mg$

$F_c=F_c\rightarrow $m$\frac{v^2$}{r}$=mg\mu$

We can cancel mass from either side of the equation and rearrange to solve for the coefficient of friction:

We can use our given values to solve:

← Didn't Know|Knew It →

Question

An object of mass 10kg undergoes uniform circular motion with a constant velocity of $10$\frac{m}{s}$$ at a radius of 10m. How long does it take for the object to make one full revolution?

Tap to reveal answer

Answer

The time for one full revolution can be calculated simply by manipulating the defintion of velocity, where the distance is just the circumference of the circlular path. The time it takes is modeled by the following equation:

$t=\frac{d}{v}$=\frac{2\pi r}{v}$$

Use the given radius and velocity to solve for the time per revolution:

$t=\frac{2\pi(10m)}{10\frac{m}${s}}=2\pi\approx6.3s$

← Didn't Know|Knew It →

Question

A 1.6kg ball is attached to a 1.8m string and is swinging in circular motion horizontally at the string's full length. If the string can withstand a tension force of 87N, what is the maximum speed the ball can travel without the string breaking?

Tap to reveal answer

Answer

The ball is experiencing centripetal force so that it can travel in a circular path. This centripetal force is written as the equation below.

$F_$c=ma=\frac{mv^2$}{r}$$

Remember that centripetal acceleration is given by the following equation.

Since the centripetal force is coming from the tension of the string, set the tension force equal to the centripetal force.

Since we're trying to find the speed of the ball, we solve for v.

$v=$\sqrt{\frac{Tr}{m}$}$

We know the following information from the question.

We can use this information in our equation to solve for the speed of the ball.

$v=$\sqrt{\frac{(87N)(1.8m)}{1.6kg}$}}$

$v=9.9$\frac{m}{s}$$

← Didn't Know|Knew It →

Question

In uniform circular motion, the net force is always directed .

Tap to reveal answer

Answer

The correct answer is "toward the center of the circle." Newton's second law tells us that the direction of the net force will be the same as the direction of the acceleration of the object.

In uniform circular motion, the object accelerates towards the center of the circle (centripetal acceleration); the net force acts in the same direction.

← Didn't Know|Knew It →

Question

A car moves around a circular path of radius 100m at a velocity of $20$\frac{m}{s}$$ . What is the coefficient of friction between the car and the road?

Tap to reveal answer

Answer

The force of friction is what keeps the car in circular motion, preventing it from flying off the track. In other words, the frictional force will be equal to the centripetal force.

$F_$c=m$\frac{v^2$}{r}$$

$F_f=\mu F_N=\mu mg$

$F_c=F_c\rightarrow $m$\frac{v^2$}{r}$=mg\mu$

We can cancel mass from either side of the equation and rearrange to solve for the coefficient of friction:

We can use our given values to solve:

← Didn't Know|Knew It →

Question

An object of mass 10kg undergoes uniform circular motion with a constant velocity of $10$\frac{m}{s}$$ at a radius of 10m. How long does it take for the object to make one full revolution?

Tap to reveal answer

Answer

The time for one full revolution can be calculated simply by manipulating the defintion of velocity, where the distance is just the circumference of the circlular path. The time it takes is modeled by the following equation:

$t=\frac{d}{v}$=\frac{2\pi r}{v}$$

Use the given radius and velocity to solve for the time per revolution:

$t=\frac{2\pi(10m)}{10\frac{m}${s}}=2\pi\approx6.3s$

← Didn't Know|Knew It →

Question

A 1.6kg ball is attached to a 1.8m string and is swinging in circular motion horizontally at the string's full length. If the string can withstand a tension force of 87N, what is the maximum speed the ball can travel without the string breaking?

Tap to reveal answer

Answer

The ball is experiencing centripetal force so that it can travel in a circular path. This centripetal force is written as the equation below.

$F_$c=ma=\frac{mv^2$}{r}$$

Remember that centripetal acceleration is given by the following equation.

Since the centripetal force is coming from the tension of the string, set the tension force equal to the centripetal force.

Since we're trying to find the speed of the ball, we solve for v.

$v=$\sqrt{\frac{Tr}{m}$}$

We know the following information from the question.

We can use this information in our equation to solve for the speed of the ball.

$v=$\sqrt{\frac{(87N)(1.8m)}{1.6kg}$}}$

$v=9.9$\frac{m}{s}$$

← Didn't Know|Knew It →

Question

In uniform circular motion, the net force is always directed .

Tap to reveal answer

Answer

The correct answer is "toward the center of the circle." Newton's second law tells us that the direction of the net force will be the same as the direction of the acceleration of the object.

In uniform circular motion, the object accelerates towards the center of the circle (centripetal acceleration); the net force acts in the same direction.

← Didn't Know|Knew It →

Question

A car moves around a circular path of radius 100m at a velocity of $20$\frac{m}{s}$$ . What is the coefficient of friction between the car and the road?

Tap to reveal answer

Answer

The force of friction is what keeps the car in circular motion, preventing it from flying off the track. In other words, the frictional force will be equal to the centripetal force.

$F_$c=m$\frac{v^2$}{r}$$

$F_f=\mu F_N=\mu mg$

$F_c=F_c\rightarrow $m$\frac{v^2$}{r}$=mg\mu$

We can cancel mass from either side of the equation and rearrange to solve for the coefficient of friction:

We can use our given values to solve:

← Didn't Know|Knew It →

Question

An object of mass 10kg undergoes uniform circular motion with a constant velocity of $10$\frac{m}{s}$$ at a radius of 10m. How long does it take for the object to make one full revolution?

Tap to reveal answer

Answer

The time for one full revolution can be calculated simply by manipulating the defintion of velocity, where the distance is just the circumference of the circlular path. The time it takes is modeled by the following equation:

$t=\frac{d}{v}$=\frac{2\pi r}{v}$$

Use the given radius and velocity to solve for the time per revolution:

$t=\frac{2\pi(10m)}{10\frac{m}${s}}=2\pi\approx6.3s$

← Didn't Know|Knew It →

Question

A ball of mass is tied to a rope and moves along a horizontal circular path of radius as shown in the diagram (view from above). The maximum tension the rope can stand before breaking is given by . Which of the following represents the ball's linear velocity given that the rope does not break?

Tap to reveal answer

Answer

This is a centripetal force problem. In this case the tension on the rope is the centripetal force that keeps the ball moving on a circle.

$T=F_$C=\frac{mv^2$}{r}$$

If we want for the rope not to break, then the tension should never exceed .

$T_${max}\geq$\frac{mv^2$}{r}$$

Now we just solve for velocity:

← Didn't Know|Knew It →

Question

A ball of mass is tied to a rope and moves along a horizontal circular path of radius as shown in the diagram (view from above). The maximum tension the rope can stand before breaking is given by . Which of the following represents the ball's linear velocity given that the rope does not break?

Tap to reveal answer

Answer

This is a centripetal force problem. In this case the tension on the rope is the centripetal force that keeps the ball moving on a circle.

$T=F_$C=\frac{mv^2$}{r}$$

If we want for the rope not to break, then the tension should never exceed .

$T_${max}\geq$\frac{mv^2$}{r}$$

Now we just solve for velocity:

← Didn't Know|Knew It →

Knew It

Circular Motion - AP Physics C: Electricity and Magnetism

A ball of mass is tied to a rope and moves along a horizontal circular path of radius as shown in the diagram (view from above). The maximum tension the rope can stand before breaking is given by . Which of the following represents the ball's linear velocity given that the rope does not break?

This is a centripetal force problem. In this case the tension on the rope is the centripetal force that keeps the ball moving on a circle. If we want for the rope not to break, then the tension should never exceed . Now we just solve for velocity:

A ball of mass is tied to a rope and moves along a horizontal circular path of radius as shown in the diagram (view from above). The maximum tension the rope can stand before breaking is given by . Which of the following represents the ball's linear velocity given that the rope does not break?

This is a centripetal force problem. In this case the tension on the rope is the centripetal force that keeps the ball moving on a circle. If we want for the rope not to break, then the tension should never exceed . Now we just solve for velocity:

A 1.6kg ball is attached to a 1.8m string and is swinging in circular motion horizontally at the string's full length. If the string can withstand a tension force of 87N, what is the maximum speed the ball can travel without the string breaking?

In uniform circular motion, the net force is always directed .

A car moves around a circular path of radius 100m at a velocity of . What is the coefficient of friction between the car and the road?

An object of mass 10kg undergoes uniform circular motion with a constant velocity of at a radius of 10m. How long does it take for the object to make one full revolution?

The time for one full revolution can be calculated simply by manipulating the defintion of velocity, where the distance is just the circumference of the circlular path. The time it takes is modeled by the following equation: Use the given radius and velocity to solve for the time per revolution:

A 1.6kg ball is attached to a 1.8m string and is swinging in circular motion horizontally at the string's full length. If the string can withstand a tension force of 87N, what is the maximum speed the ball can travel without the string breaking?

In uniform circular motion, the net force is always directed .

A car moves around a circular path of radius 100m at a velocity of . What is the coefficient of friction between the car and the road?

An object of mass 10kg undergoes uniform circular motion with a constant velocity of at a radius of 10m. How long does it take for the object to make one full revolution?

The time for one full revolution can be calculated simply by manipulating the defintion of velocity, where the distance is just the circumference of the circlular path. The time it takes is modeled by the following equation: Use the given radius and velocity to solve for the time per revolution:

A 1.6kg ball is attached to a 1.8m string and is swinging in circular motion horizontally at the string's full length. If the string can withstand a tension force of 87N, what is the maximum speed the ball can travel without the string breaking?

In uniform circular motion, the net force is always directed .

A car moves around a circular path of radius 100m at a velocity of . What is the coefficient of friction between the car and the road?

An object of mass 10kg undergoes uniform circular motion with a constant velocity of at a radius of 10m. How long does it take for the object to make one full revolution?

The time for one full revolution can be calculated simply by manipulating the defintion of velocity, where the distance is just the circumference of the circlular path. The time it takes is modeled by the following equation: Use the given radius and velocity to solve for the time per revolution:

A 1.6kg ball is attached to a 1.8m string and is swinging in circular motion horizontally at the string's full length. If the string can withstand a tension force of 87N, what is the maximum speed the ball can travel without the string breaking?

In uniform circular motion, the net force is always directed .

A car moves around a circular path of radius 100m at a velocity of . What is the coefficient of friction between the car and the road?

An object of mass 10kg undergoes uniform circular motion with a constant velocity of at a radius of 10m. How long does it take for the object to make one full revolution?

The time for one full revolution can be calculated simply by manipulating the defintion of velocity, where the distance is just the circumference of the circlular path. The time it takes is modeled by the following equation: Use the given radius and velocity to solve for the time per revolution:

A ball of mass is tied to a rope and moves along a horizontal circular path of radius as shown in the diagram (view from above). The maximum tension the rope can stand before breaking is given by . Which of the following represents the ball's linear velocity given that the rope does not break?

This is a centripetal force problem. In this case the tension on the rope is the centripetal force that keeps the ball moving on a circle. If we want for the rope not to break, then the tension should never exceed . Now we just solve for velocity:

A ball of mass is tied to a rope and moves along a horizontal circular path of radius as shown in the diagram (view from above). The maximum tension the rope can stand before breaking is given by . Which of the following represents the ball's linear velocity given that the rope does not break?

This is a centripetal force problem. In this case the tension on the rope is the centripetal force that keeps the ball moving on a circle. If we want for the rope not to break, then the tension should never exceed . Now we just solve for velocity:

A car moves around a circular path of radius 100m at a velocity of $20$\frac{m}{s}$$ . What is the coefficient of friction between the car and the road?

An object of mass 10kg undergoes uniform circular motion with a constant velocity of $10$\frac{m}{s}$$ at a radius of 10m. How long does it take for the object to make one full revolution?

A car moves around a circular path of radius 100m at a velocity of $20$\frac{m}{s}$$ . What is the coefficient of friction between the car and the road?

An object of mass 10kg undergoes uniform circular motion with a constant velocity of $10$\frac{m}{s}$$ at a radius of 10m. How long does it take for the object to make one full revolution?

A car moves around a circular path of radius 100m at a velocity of $20$\frac{m}{s}$$ . What is the coefficient of friction between the car and the road?

An object of mass 10kg undergoes uniform circular motion with a constant velocity of $10$\frac{m}{s}$$ at a radius of 10m. How long does it take for the object to make one full revolution?

A car moves around a circular path of radius 100m at a velocity of $20$\frac{m}{s}$$ . What is the coefficient of friction between the car and the road?

An object of mass 10kg undergoes uniform circular motion with a constant velocity of $10$\frac{m}{s}$$ at a radius of 10m. How long does it take for the object to make one full revolution?