Interpreting Work, Energy, and Power Diagrams - AP Physics C: Electricity and Magnetism
Card 1 of 66
An object with a mass of 
is moving at 
in a straight line on a fricitonless surface. After a force of 
acting in the direction of its motion is applied to it for 
, what is the object's speed in meters per second?
An object with a mass of
Tap to reveal answer
Begin by using the following equation relating the initial and final kinetic energy and the work done on the object:
Then, plug in the given variables and solve for the final speed.
Simplify terms.
Isolate the final velocity and solve.
Begin by using the following equation relating the initial and final kinetic energy and the work done on the object:
Then, plug in the given variables and solve for the final speed.
Simplify terms.
Isolate the final velocity and solve.
← Didn't Know|Knew It →
A 
projectile is launched straight upwards at an initial velocity of 
. What is the maximum height that this projectile reaches in meters?
Round to the nearest meter, and assume the projectile encounters no air resistance.
A
Round to the nearest meter, and assume the projectile encounters no air resistance.
Tap to reveal answer
You can use the motion equation and find the maximum, but it may be faster to use energy equations. Set the initial kinetic energy equal to the gravitational potential energy at the maximum height and solve for the height.
Mass cancels.
Isolate the height and solve.
Round to 
.
You can use the motion equation and find the maximum, but it may be faster to use energy equations. Set the initial kinetic energy equal to the gravitational potential energy at the maximum height and solve for the height.
Mass cancels.
Isolate the height and solve.
Round to
← Didn't Know|Knew It →
A set of cars on a roller coaster with a combined mass of 
is at the top of its initial hill and will drop 
down the hill before the track starts to rise again. What will the coaster's speed be at the moment the track starts to rise again?
Round to the nearest meter per second. You may also assume the track does not create friction.
A set of cars on a roller coaster with a combined mass of
Round to the nearest meter per second. You may also assume the track does not create friction.
Tap to reveal answer
Remember that gravitational potential energy is not affected by the path downward (or upward)—whether it is straight, curved, or winding—only by how big the drop is. Once that is taken into account, you can simply set the initial gravitational potential energy and final kinetic energy equal to each other as if the coaster were falling straight down and solve for the final velocity.
The mass cancels.
Isolate the velocity and solve.
Remember that gravitational potential energy is not affected by the path downward (or upward)—whether it is straight, curved, or winding—only by how big the drop is. Once that is taken into account, you can simply set the initial gravitational potential energy and final kinetic energy equal to each other as if the coaster were falling straight down and solve for the final velocity.
The mass cancels.
Isolate the velocity and solve.
← Didn't Know|Knew It →
A plane weighing 1500kg dives 40m with its engine off before it goes into a circular pattern with a radius of 200m while maintaining its speed at the end of its dive. How much centripetal force, in Newtons, is acting on the plane?
A plane weighing 1500kg dives 40m with its engine off before it goes into a circular pattern with a radius of 200m while maintaining its speed at the end of its dive. How much centripetal force, in Newtons, is acting on the plane?
Tap to reveal answer
First, find the gravitational potential energy of the drop. Then, set it equal to the kinetic energy at the end of the drop and solve for the velocity.
The mass cancels.
Isolate the velocity and solve.
This gives you the last term you need to solve for the centripetal force.
First, find the gravitational potential energy of the drop. Then, set it equal to the kinetic energy at the end of the drop and solve for the velocity.
The mass cancels.
Isolate the velocity and solve.
This gives you the last term you need to solve for the centripetal force.
← Didn't Know|Knew It →
If the maximum speed of an object attached to the end of a elastic has a 1:1 ratio (a meter per second for each meter) with how much the elastic is stretched or compressed from its starting position, which of the following is true?
If the maximum speed of an object attached to the end of a elastic has a 1:1 ratio (a meter per second for each meter) with how much the elastic is stretched or compressed from its starting position, which of the following is true?
Tap to reveal answer
Set the elastic potential and kinetic energy equations equal to each other:
You are given the fact that in this case, 
. This allows you to simplify the equality.
This shows us that there is a 1:1 ratio between the spring constant of the elastic and the mass of the object.
Set the elastic potential and kinetic energy equations equal to each other:
You are given the fact that in this case,
This shows us that there is a 1:1 ratio between the spring constant of the elastic and the mass of the object.
← Didn't Know|Knew It →
A 
pumpkin is being launched out of an air cannon. For safety reasons, the pumpkin cannot be more than 
off the ground during flight, and this particular cannon always launches pumpkins at 
meters per second—any more power and the pumpkin could be blasted apart; any less and the pumpkin may not leave the launch tube.
What is the maximum possible angle of launch in degrees?
Round to the nearest whole degree.
A
What is the maximum possible angle of launch in degrees?
Round to the nearest whole degree.
Tap to reveal answer
We know the maximum height of the pumpkin, which tells us the maximum energy of the launch. Calculate the final gravitational potential energy.
Now set this value equal to a kinetic energy equation that uses the vertical component of the velocity at launch.
Use the vertical velocity component to determine the launch angle.
We know the maximum height of the pumpkin, which tells us the maximum energy of the launch. Calculate the final gravitational potential energy.
Now set this value equal to a kinetic energy equation that uses the vertical component of the velocity at launch.
Use the vertical velocity component to determine the launch angle.
← Didn't Know|Knew It →
An object with a mass of is moving at in a straight line on a fricitonless surface. After a force of acting in the direction of its motion is applied to it for , what is the object's speed in meters per second?
An object with a mass of
Tap to reveal answer
Begin by using the following equation relating the initial and final kinetic energy and the work done on the object:
Then, plug in the given variables and solve for the final speed.
Simplify terms.
Isolate the final velocity and solve.
Begin by using the following equation relating the initial and final kinetic energy and the work done on the object:
Then, plug in the given variables and solve for the final speed.
Simplify terms.
Isolate the final velocity and solve.
← Didn't Know|Knew It →
A projectile is launched straight upwards at an initial velocity of . What is the maximum height that this projectile reaches in meters?
Round to the nearest meter, and assume the projectile encounters no air resistance.
A
Round to the nearest meter, and assume the projectile encounters no air resistance.
Tap to reveal answer
You can use the motion equation and find the maximum, but it may be faster to use energy equations. Set the initial kinetic energy equal to the gravitational potential energy at the maximum height and solve for the height.
Mass cancels.
Isolate the height and solve.
Round to .
You can use the motion equation and find the maximum, but it may be faster to use energy equations. Set the initial kinetic energy equal to the gravitational potential energy at the maximum height and solve for the height.
Mass cancels.
Isolate the height and solve.
Round to
← Didn't Know|Knew It →
A set of cars on a roller coaster with a combined mass of is at the top of its initial hill and will drop down the hill before the track starts to rise again. What will the coaster's speed be at the moment the track starts to rise again?
Round to the nearest meter per second. You may also assume the track does not create friction.
A set of cars on a roller coaster with a combined mass of
Round to the nearest meter per second. You may also assume the track does not create friction.
Tap to reveal answer
Remember that gravitational potential energy is not affected by the path downward (or upward)—whether it is straight, curved, or winding—only by how big the drop is. Once that is taken into account, you can simply set the initial gravitational potential energy and final kinetic energy equal to each other as if the coaster were falling straight down and solve for the final velocity.
The mass cancels.
Isolate the velocity and solve.
Remember that gravitational potential energy is not affected by the path downward (or upward)—whether it is straight, curved, or winding—only by how big the drop is. Once that is taken into account, you can simply set the initial gravitational potential energy and final kinetic energy equal to each other as if the coaster were falling straight down and solve for the final velocity.
The mass cancels.
Isolate the velocity and solve.
← Didn't Know|Knew It →
A plane weighing 1500kg dives 40m with its engine off before it goes into a circular pattern with a radius of 200m while maintaining its speed at the end of its dive. How much centripetal force, in Newtons, is acting on the plane?
A plane weighing 1500kg dives 40m with its engine off before it goes into a circular pattern with a radius of 200m while maintaining its speed at the end of its dive. How much centripetal force, in Newtons, is acting on the plane?
Tap to reveal answer
First, find the gravitational potential energy of the drop. Then, set it equal to the kinetic energy at the end of the drop and solve for the velocity.
The mass cancels.
Isolate the velocity and solve.
This gives you the last term you need to solve for the centripetal force.
First, find the gravitational potential energy of the drop. Then, set it equal to the kinetic energy at the end of the drop and solve for the velocity.
The mass cancels.
Isolate the velocity and solve.
This gives you the last term you need to solve for the centripetal force.
← Didn't Know|Knew It →
If the maximum speed of an object attached to the end of a elastic has a 1:1 ratio (a meter per second for each meter) with how much the elastic is stretched or compressed from its starting position, which of the following is true?
If the maximum speed of an object attached to the end of a elastic has a 1:1 ratio (a meter per second for each meter) with how much the elastic is stretched or compressed from its starting position, which of the following is true?
Tap to reveal answer
Set the elastic potential and kinetic energy equations equal to each other:
You are given the fact that in this case, . This allows you to simplify the equality.
This shows us that there is a 1:1 ratio between the spring constant of the elastic and the mass of the object.
Set the elastic potential and kinetic energy equations equal to each other:
You are given the fact that in this case,
This shows us that there is a 1:1 ratio between the spring constant of the elastic and the mass of the object.
← Didn't Know|Knew It →
A pumpkin is being launched out of an air cannon. For safety reasons, the pumpkin cannot be more than off the ground during flight, and this particular cannon always launches pumpkins at meters per second—any more power and the pumpkin could be blasted apart; any less and the pumpkin may not leave the launch tube.
What is the maximum possible angle of launch in degrees?
Round to the nearest whole degree.
A
What is the maximum possible angle of launch in degrees?
Round to the nearest whole degree.
Tap to reveal answer
We know the maximum height of the pumpkin, which tells us the maximum energy of the launch. Calculate the final gravitational potential energy.
Now set this value equal to a kinetic energy equation that uses the vertical component of the velocity at launch.
Use the vertical velocity component to determine the launch angle.
We know the maximum height of the pumpkin, which tells us the maximum energy of the launch. Calculate the final gravitational potential energy.
Now set this value equal to a kinetic energy equation that uses the vertical component of the velocity at launch.
Use the vertical velocity component to determine the launch angle.
← Didn't Know|Knew It →
An object with a mass of is moving at in a straight line on a fricitonless surface. After a force of acting in the direction of its motion is applied to it for , what is the object's speed in meters per second?
An object with a mass of
Tap to reveal answer
Begin by using the following equation relating the initial and final kinetic energy and the work done on the object:
Then, plug in the given variables and solve for the final speed.
Simplify terms.
Isolate the final velocity and solve.
Begin by using the following equation relating the initial and final kinetic energy and the work done on the object:
Then, plug in the given variables and solve for the final speed.
Simplify terms.
Isolate the final velocity and solve.
← Didn't Know|Knew It →
A projectile is launched straight upwards at an initial velocity of . What is the maximum height that this projectile reaches in meters?
Round to the nearest meter, and assume the projectile encounters no air resistance.
A
Round to the nearest meter, and assume the projectile encounters no air resistance.
Tap to reveal answer
You can use the motion equation and find the maximum, but it may be faster to use energy equations. Set the initial kinetic energy equal to the gravitational potential energy at the maximum height and solve for the height.
Mass cancels.
Isolate the height and solve.
Round to .
You can use the motion equation and find the maximum, but it may be faster to use energy equations. Set the initial kinetic energy equal to the gravitational potential energy at the maximum height and solve for the height.
Mass cancels.
Isolate the height and solve.
Round to
← Didn't Know|Knew It →
A set of cars on a roller coaster with a combined mass of is at the top of its initial hill and will drop down the hill before the track starts to rise again. What will the coaster's speed be at the moment the track starts to rise again?
Round to the nearest meter per second. You may also assume the track does not create friction.
A set of cars on a roller coaster with a combined mass of
Round to the nearest meter per second. You may also assume the track does not create friction.
Tap to reveal answer
Remember that gravitational potential energy is not affected by the path downward (or upward)—whether it is straight, curved, or winding—only by how big the drop is. Once that is taken into account, you can simply set the initial gravitational potential energy and final kinetic energy equal to each other as if the coaster were falling straight down and solve for the final velocity.
The mass cancels.
Isolate the velocity and solve.
Remember that gravitational potential energy is not affected by the path downward (or upward)—whether it is straight, curved, or winding—only by how big the drop is. Once that is taken into account, you can simply set the initial gravitational potential energy and final kinetic energy equal to each other as if the coaster were falling straight down and solve for the final velocity.
The mass cancels.
Isolate the velocity and solve.
← Didn't Know|Knew It →
A plane weighing 1500kg dives 40m with its engine off before it goes into a circular pattern with a radius of 200m while maintaining its speed at the end of its dive. How much centripetal force, in Newtons, is acting on the plane?
A plane weighing 1500kg dives 40m with its engine off before it goes into a circular pattern with a radius of 200m while maintaining its speed at the end of its dive. How much centripetal force, in Newtons, is acting on the plane?
Tap to reveal answer
First, find the gravitational potential energy of the drop. Then, set it equal to the kinetic energy at the end of the drop and solve for the velocity.
The mass cancels.
Isolate the velocity and solve.
This gives you the last term you need to solve for the centripetal force.
First, find the gravitational potential energy of the drop. Then, set it equal to the kinetic energy at the end of the drop and solve for the velocity.
The mass cancels.
Isolate the velocity and solve.
This gives you the last term you need to solve for the centripetal force.
← Didn't Know|Knew It →
If the maximum speed of an object attached to the end of a elastic has a 1:1 ratio (a meter per second for each meter) with how much the elastic is stretched or compressed from its starting position, which of the following is true?
If the maximum speed of an object attached to the end of a elastic has a 1:1 ratio (a meter per second for each meter) with how much the elastic is stretched or compressed from its starting position, which of the following is true?
Tap to reveal answer
Set the elastic potential and kinetic energy equations equal to each other:
You are given the fact that in this case, . This allows you to simplify the equality.
This shows us that there is a 1:1 ratio between the spring constant of the elastic and the mass of the object.
Set the elastic potential and kinetic energy equations equal to each other:
You are given the fact that in this case,
This shows us that there is a 1:1 ratio between the spring constant of the elastic and the mass of the object.
← Didn't Know|Knew It →
A pumpkin is being launched out of an air cannon. For safety reasons, the pumpkin cannot be more than off the ground during flight, and this particular cannon always launches pumpkins at meters per second—any more power and the pumpkin could be blasted apart; any less and the pumpkin may not leave the launch tube.
What is the maximum possible angle of launch in degrees?
Round to the nearest whole degree.
A
What is the maximum possible angle of launch in degrees?
Round to the nearest whole degree.
Tap to reveal answer
We know the maximum height of the pumpkin, which tells us the maximum energy of the launch. Calculate the final gravitational potential energy.
Now set this value equal to a kinetic energy equation that uses the vertical component of the velocity at launch.
Use the vertical velocity component to determine the launch angle.
We know the maximum height of the pumpkin, which tells us the maximum energy of the launch. Calculate the final gravitational potential energy.
Now set this value equal to a kinetic energy equation that uses the vertical component of the velocity at launch.
Use the vertical velocity component to determine the launch angle.
← Didn't Know|Knew It →
An object with a mass of is moving at in a straight line on a fricitonless surface. After a force of acting in the direction of its motion is applied to it for , what is the object's speed in meters per second?
An object with a mass of
Tap to reveal answer
Begin by using the following equation relating the initial and final kinetic energy and the work done on the object:
Then, plug in the given variables and solve for the final speed.
Simplify terms.
Isolate the final velocity and solve.
Begin by using the following equation relating the initial and final kinetic energy and the work done on the object:
Then, plug in the given variables and solve for the final speed.
Simplify terms.
Isolate the final velocity and solve.
← Didn't Know|Knew It →
A projectile is launched straight upwards at an initial velocity of . What is the maximum height that this projectile reaches in meters?
Round to the nearest meter, and assume the projectile encounters no air resistance.
A
Round to the nearest meter, and assume the projectile encounters no air resistance.
Tap to reveal answer
You can use the motion equation and find the maximum, but it may be faster to use energy equations. Set the initial kinetic energy equal to the gravitational potential energy at the maximum height and solve for the height.
Mass cancels.
Isolate the height and solve.
Round to .
You can use the motion equation and find the maximum, but it may be faster to use energy equations. Set the initial kinetic energy equal to the gravitational potential energy at the maximum height and solve for the height.
Mass cancels.
Isolate the height and solve.
Round to
← Didn't Know|Knew It →